New Page 1

Type	Thickness (MM)	Tolerance	Construction	General Application
KHA3 KHA6 KHA 10 KH2A6	3.00 3.50 4.75 5.0	+0.30 +0.30 +0.40 +0.40	Leather-Nylon-Leather	TEXTILE: Saw & Roller Gin, Blow Room, Card, Drawing Conedrum, Ring Frame Main Drive etc. ENGINEERING :- Pumps, Plaining machine, Wire drawing Mill, Automatic lathes, Punching Press, Milling Machine, Drill, Rotor Drives etc., STEEL PLANT: Wrapper drive Oxidising Plant etc.,
KHCA3 KHCA6 KHCA 10 KHC2A6	1.75 2.25 3.0 3.5	+0.25 +0.25 +0.30 +0.30	Leather-Nylon-Rubberised Fabric
KHGA6 KHG2A6 KHG2A8	2.25 3.00 4.00	+0.30 +0.30 +0.30	Leather-Nylon	Conveyors and Check Straps
KH2A 10 KH3A 10 KH4A 10 KH5A 10 KH6A 10	6.25 7.50 8.50 9.25 10.50	+0.50 +0.50 +0.50 +0.50 +0.50	Leather-Nylon-Leather	PAPER & PULP Rag breakers, Beaters, Pumps,Agitators, Couch, Press, Pulpers, Dryers, Fans, Refiners etc., MARBLE CUTTING AND STONE CRUSHING: Gang Saws,Band Saws and Crushers etc. ENGINEERING Propeller Fan, Compressor, Generators, Rolling mill etc., STEEL PLANT Hammer Mill, CEMENT: Bag diverters and Conveyors etc. WOOLEN: Cards, combers and Gill Boxes
KHC2A 10 KHC3A 10 KHC4A 10 KHC5A 10 KHC6A 10	4.25 5.50 6.20 7.00 8.75	+0.30 +0.30 +0.30 +0.30 +0.30	Leather-Nylon-Rubberised Fabric
Condenor Tape Combing Leather Gill Box Leather	3.00 3.5mm 3.5mm	+0.30 +0.30 +0.30	Leather-Nylon-Leather
Special Belts for specific requirements can also be manufactured from same combination of materials on request


UNMATCHED CHARACTERISTICS		UNBEATABLE RESULTS
Higher Load Carrying Capasity Higher Elasticity without permanent Stretch Low Flex Resistance High Coefficient of FrictionHigh Abrasion Resistance		High Efficiency of Power Transmission - 96% and above Saving in Power Consumption up to 14% as compared to "V" Belts Loading and trouble Free Operational Life Suitable for short center & High Ratio drives Freedom in Drive Design.


	Home \| Company Profile \| Joining Methods \| Selection \| E-m@il Us